How to Apply Vinyl Graphics and Decals
posted in PCB_Articles |There’s a right way, and an easy way to apply your decal or graphics. You decide which works best for you, then that’s the right way.
Preparing the surface for your decal:
The surface area that the vinyl goes on must be clean and free of grease, dust, or any contaminates. A 60/40 mixture of vinegar and water or soap and water works well to clean the surface; glass cleaners may not allow vinyl to adhere properly. Before applying the decal, wipe the area with isopropyl alcohol* and wipe it dry with a clean cloth. If any solvent residue is left on the surface gas bubbles may appear. Do not apply vinyl decals or Graphics to a fresh paint. Freshly panted surfaces must be completely cured then left to stand for 3 weeks before adhering your decals or graphics.
Now, follow one of the methods below to apply your vinyl graphic.
(Our Preferred Method)
HINGE METHOD:
This method is a little more involved, but perfect alignment is guaranteed. Temperature: Must be above 46